农村露脸贵在真实,成人做爰黄a片免费看直播蜜臀,日欧一片内射va在线影院,免费网站观看

Two Chamber Hast

Product description：

Feature

1. High efficient double chamber design

2. Program/Fixed-value mode can be swithced 

3. The controller is customized by Haituo is adopted. The color LCD screen is rich in content and has a variety of functions  

4. Round inner chamber,SUS316L stainless steel (surface electrolytic polishing) round test inner chamber structure, in line with the industrial safety container standards, can prevent the condensation water in the test design  

5. The packing design makes the door and chamber more closely combined, which is completely different from the traditional extrusion type and can prolong the packing life 

6. Independent steam generator room to avoid direct impact of steam on products, so as not to cause local damage of products

7. Fast exhaust mode, cold air will be exhausted before the test;  The design of cold air discharge in the test (air discharge in the test barrel) improves pressure stability and reproducibility

8. Ultra-long-term experimental operation time, long-term experimental machine operation can be 400 hours.

9.  Built-in water supply tank, efficient automatic water supply system, and ensure that the hot water after testing is cooled to the built-in cooling box before discharge 


Share to:
Other parameters

1. Set temperature :105.0 ~ 150.0℃??

2. Humidity range :75%RH to 100%RH??

3. Temperature rise time: ≤100 minutes (from room temperature to 120° and humidity to 85%RH time)??

4 temperature stability time: test box touch screen display temperature stability (≤±2℃), 5 minutes inside the box temperature and the target temperature deviation ≤±2℃, 10 minutes inside the box temperature stability ≤±2℃ (no load)??

5. Pressure: maximum pressure 2kg/cm2??

6 pressure working range: 0.02 ~ 0.19mpa/relative pressure??

7. Time range: 0 Hr to 999 Hr??

8. Pressure time: 0.00 Kg ~ 1.04 Kg/cm2 about 45 minutes??

9 temperature deviation: ≤±1.5℃ (no load)??

10 temperature uniformity: ≤±1.5℃ (without load)??

11. Humidity deviation: when humidity ≥75%RH, humidity deviation ≤±3%RH;??

When humidity < 75%RH, humidity deviation ≤±5%RH;??

12. Test mode: HUM(unsaturated :75%-100% humidity) test mode /STD(saturated :100% humidity) test mode??

13 pressure fluctuation uniformity: ± 0.1kg??

14 humidity distribution average: ± 3%RH??

15. Layer frame: each box is equipped with test steel mesh (lamellae), steel mesh size: ≥W240×D400mm, load: ≥10KG, steel mesh number: ≥1??

16. Noise: 1M away from the device ≤7??

Material of test chamber: ?

1 test box size :φ316×D530mm (diameter × depth)??

2. Capacity: 40L x 2 containers??

3. Full machine size: ≤1000×1500×1850mm (width × depth × height)??

4. Inner barrel material: stainless steel plate (SUS# 316 3mm)??

5. The material of the outer barrel: stainless steel plate or electrolytic plate, anti-static plastic-sprayed insulation material: rock wool and rigid polyurethane foam heat preservation steam room??

6 heating tube: titanium tube heating, not easy to rust.?



主站蜘蛛池模板： 淮滨县| 上高县| 锦州市| 剑河县| 惠安县| 郯城县| 肃北| 长春市| 定结县| 达州市| 阳泉市| 云安县| 房产| 呼图壁县| 闽侯县| 南充市| 西青区| 罗源县| 西林县| 绥德县| 曲阳县| 方正县| 巩义市| 丰城市| 柳河县| 涡阳县| 滁州市| 青州市| 兖州市| 辰溪县| 阳西县| 宁明县| 全州县| 扬州市| 孟连| 鲁甸县| 夏邑县| 西藏| 贵港市| 佳木斯市| 宜丰县|